29 May 2009

Looking For Employment As An Industrial Manufacturing Eng in Dubai

CURRICULUM VITAE
NYAGONA FORTUNE
1473 UNIT A SEKE
Chitungwiza
Tell: +263-912832050, +263-912960759
Email: nyagonaf@gmail.com
Career Objectives
Assist in planning, organizing and supporting manufacturing systems through:
Ensuring optimum utilisation of machinery and equipment to achieve acceptable production capacity levels and plant availability.
Development and implementation of continuous quality improvement practices.
Maintenance and implementation of highest standards of safety, health and environmental programmes so as to ensure that all processes are conducted in a technically efficient, safe and health manner.
Background attributes and motivation skills
Have an appreciation of the operation of the Zimbabwe industry
Willing to work outside working hours and prepared to travel to new locations,
Ability to pay attention to detail and highly quality conscious,
Able to work under pressure with minimum supervision,
Good communication and negotiation skills at all levels,
Results oriented and a team player.
Work experience
COMPANY 1- Zimbabwe Electricity Supply Authority, (ZESA), Manufacturing Division, Southerton, Harare.
POSITION HELD TRAINEE ENGINEER PROGRAME (AUG 2004-JUNE 2008)
DUTIES AND RESPONSIBILITIES
Familiarization with the production planning processes, Manufacturing and Maintenance
Areas covered:
Production planning and control
Job/Product costing
Material requirement planning
Gant Charts for project management
Labour Utilization and productivity
Transformer manufacturing and servicing
Fabrication and Sheet metal processes and machine shop practices.
Maintenance Policies and Systems for planned and breakdown maintenance programs including plant and equipment

OTHERS
Designed and commissioned a sand blasting plant for cleaning of transformer tanks before painting.
Design and construction of communication towers
Modified winding machine counters from digital to mechanical after spares could not be sourced from outside boarders due to foreign currency shortage
2008 TO PRESENT
APPOINTED MECHANICAL QUALITY INSPECTOR
DUTIES: To make sure that manufactured products meet specified standards before they progress to the next phase of production or are sent out to customers.
To ensure that the quality of manufactured products will equal that specified at design stage by using national and or International design standards.
Ensuring that there is continual improvement and learning to increase growth and profitability.
Carryout internal quality audits thereby coming up with preventive and corrective actions.
Checking and testing materials and parts from outside suppliers.
Ensuring that measuring and testing equipment is set correctly.
Selecting a sample from a production batch for inspection or testing.
Carrying out tests on products by observing or measuring dimensions, weight or physical or chemical characteristics against specified requirements.
Keeping accurate records of checks.
OTHERS
-Inducting of all new employees .
-Training and development on Quality matters.
ORGANISATION,2 BINDURA NICKEL MINE (TROJAN)
POSITION HELD UNDERGROUD MECH FOREMAN (2000-2004)
DUTIES AND RESPONSIBILITIES
Planned and breakdown maintenance program for underground plant and equipment, that includes compressors, jack hammers ,pumps, safety valves, water gauges, pressure gauges and feed pumps.
Production Planning and Control
Inventory Management
Quality control and management of core extracted
Constant communication to ensure smooth plant operation
Training people in basic fault diagnostic techniques and general maintenance skills as well as health and safety awareness
Critical spares ordering and management.
Carryout Inspections (condition monitoring) of all equipment routinely where it is cost effective to do so by through inspection lists, check for level of detail and to make sure the route is actually completed.
Documenting all inspections and completed according to schedule.
Used simple inspection tools such as a stroboscope, infrared thermomter, vibration pen, and vibration monitor etc.
ORGANISATION, 3 STANDARDS ASSOCIATION OF ZIMBABWE
POSITION HELD TECHNICAL OFFICER MECH LAB( 1993-2000)DUTIES AND RESPONSIBILITIES
Testing all metallurgical and mechanical components for compliance with national and International standards with a dedicated machine shop to provide specimen preparation. Specimen prepared for metallic and non-metallic materials in the evaluation of tensile, compression, impact, weldability, fatigue and bend properties.
Carried out destructive & non-destructive test
Carried out failure instigation to establish causes of failure
Carried out hardness test-Brinell/Vickers
Technologies
Visual basics 6.0 SQL Ms Excels
Ms Word Ms Power point Ms Access
Image Editors
AutoCAD 2002, 2006,and 2006 Mechanical

PROFFESSIONAL QUALIFICATIONS
O and A Level(Cambridge),
National Intermediate technician cert (N.I.T.C) 1993,(HRE POLY)
National Technician cert (N.T.C) 1994,(HRE POLY)
National Diploma Prod Mechanical (N.D) 1995,(HRE POLY)
Higher National Diploma Mech Eng HND (2004),(HRE POLY)
B.Tech (hons) Degree in Industrial &Manufacturing Eng (2008),(NUST in conjunction with HIT)
Post Grad Cert in Teaching and Learning in Higher Education (2008),(HIT
Continued Education Includes;
Intellectual Property and Patent Acquisition with ARIPO
Trade tested, Skilled worker class 2 fitter machinist
Maintenance Management System (MMS)
Occupational Health and Safety in Zimbabwe
First aid and Industrial safety
Certificate training in Quality Auditing
PROGRAMME: Bachelor of Technology Honors Degree in Industrial and Manufacturing Engineering (August 2005 to June 2008)

December 2007 Code Part IV Semester I Examinations
EIM412 Mechatronics 2.2
EIM413 Engineering Economics Analysis 2.1
EIM414 Manufacturing Systems III 2.1
EIM415 Metal Forming and Plastic Eng. Processes 2.1
EIM416 CAD/CAM I 2.2


June 2008 Code Part IV Semester II Examinations
EIM422 Operations Research 2.1
EIM423 Industrial Automation and Robotics 2.1
EIM424 Advances in Manufacturing Processes 2.1
EIM425 CAD/CAM II 2.1
HIT400 Capstone Design Project 2.1


Overall Pass

OVERALL DECISION: PASS

Overall Degree grade: 2.2
b) Institution Harare Institute of Technology
Program Post Grad. Certificate in Higher and Tertiary Education

Courses Grade
I. Teaching and Learning in Higher Education Pass
II. Curriculum Issues in Higher Education Pass
III.Applied Educational Technology Pass
IV. Resource and Development Pass



Member of Zimbabwe Institute of Engineers (ZIE)

Personal Details
DATE OF BIRTH O7 SEPTEMBER 1969 SEX MALE
MARITAL STATUS MARRIED NATIONAL ID 48-051038-N-48
DRIVER LICENCE 91323G CLASS 4 (1994) PASSPORT AN072564
LANGUAGES ENGLISH&SHONA NATIONALITY ZIMBABWEAN
References
1. Mr D. Shamuyarira (Senior Foreman)
3. Mr. Madhorobha (Prod & Planning
Zesa Enterprises Manufacturing Div
Zesa Enterprises manufacturing
Tel Bus +263-666781-9
Tel Bus +263-4-666781-9


2
.Eng. O.Chimusoro Internship Coordinator
Harare Institute of Technology
P O Box BE277
Harare
Tell: 0912 857 013
E-Mail:ochimusoro@gmail.com


4. Mr. E Dzingai (Manager)
Bindura Nickel Mine
Tel Bus +263-71-7821/7951/60
Bindura

phone:+263-912832050